Precautions for bathroom decoration construction

2022-07-22
  • Detail

Modern urban life is busy and tense. A warm home can bring everyone the most relaxed leisure time. But how can we make home warm and comfortable? As long as you master some skills, you can easily create a pleasant home. Xiaobian has prepared a series of fashion information for you, from house decoration to home decoration, to help you have a relaxed and comfortable life

modern people are moving faster and faster. Many white-collar workers pay more and more attention to the comfort of the bathroom. A good bathroom can make people feel comfortable, and bathroom decoration has become more and more important. We should pay attention to the following points:

beckma bathroom cabinet Dongpeng ceramic tile

as an important functional area in home life, the bathroom naturally needs to pay more attention to decoration. In order to create a comfortable and warm sanitary space, you must know the following points

I. threshold

threshold is a barrier to prevent water from overflowing from the bathroom. Its design and construction points include:

1) the upper plane of the threshold should be inclined to the inside of the bathroom, so that water droplets can slide smoothly to the inside of the bathroom

2) the threshold should be the same width as the door frame, and the door frame should be the same thickness as the wall, so that there will be no big difference when laying floor tiles, and the chance of creating a breach will be relatively reduced

II. Ground waterproof

there are many kinds of waterproof materials. At present, waterproof agents are widely used. When laying the waterproof layer, it should be paved to about 20 cm above the foot of the wall, and at least not lower than the height of the threshold. When there is a reserved pipe on the floor, the waterproof layer also needs to cover the reserved pipe. After the floor is waterproof and dry, cement mortar must be used for priming or protective measures must be taken immediately to prevent the waterproof layer from being damaged

III. floor tile laying

1) there should be a drainage slope of about 1%, and the slope faces the water inlet under the floor

2) the floor tile joint should be the same thickness and aligned with the wall tile joint

3) when the front wall of the bathtub is built with bricks, it is best to stick the floor tiles below the wall first, and then stick the wall tiles to avoid cracks

IV. face washing table

choose “ Tongti ” Of (i.e. the surface material of the table top is consistent with the internal material composition and color), the table top with only one layer of surface rubber shell cannot be selected, because the table top with only surface rubber shell cannot be repaired once it is damaged. (to check whether the table top is “ all-in-one ”, you can use light to illuminate it from the back closely, and the table top that can transmit light is “ all-in-one &rdquo.). In addition, caulking agent must be applied at the joints between the table top and the washbasin to prevent water from seeping out from the joints

v. toilet

generally, when installing the toilet, it is used to fix the toilet with cement mortar. In fact, this method is wrong. After fixing the toilet with this method, the toilet cannot be disassembled again. If the pipeline is seriously blocked, there is only one way to knock off the toilet

VI. exhaust fan

generally, when people build houses, they don't pay much attention to bathroom ventilation equipment, and most of them just install an exhaust fan. The bad gas in the bathroom cannot be discharged outdoors, but is still circulating in the bathroom. As an important functional area in home life, bathroom naturally needs to pay more attention in decoration

成都耳鼻喉医院

唐山男科医院

哈尔滨男科医院

Copyright © 2011 JIN SHI